Lane Change Assistance

Lane Change Assistance Control Modules

Removing






- Remove the rear bumper cover.

- Disconnect the electrical connector - 2 -.

- Remove the bolts - arrows -.

- Remove the lane change assistance control module - 1 - from the mount.

Installing

• Tightening specification, refer to => [ Lane Change Assistance Overview ] Lane Change Assistance Overview.

Install in reverse order of removal, observing the following:

- Install the rear bumper cover.

- Calibrate the lane change assistance control module (J769) and lane change assistance control module 2 (J770) => [ Lane Change Assistance, Preparing for Calibration ] Lane Change Assistance, Preparing for Calibration.