Center Tunnel Heat Shield

Center Tunnel Heat Shield

Removing






- Remove the selector mechanism function unit.

- Remove the rear heat shield for the tunnel. Refer to => [ Rear Tunnel Heat Shield ] Rear Tunnel Heat Shield.

- Remove the nuts - 1 and 2 -.

- Pry out the spring clips - arrows -.

- Remove the heat shield - 3 - to the rear.

Installing

• Tightening specifications, refer to => [ Heat Shields Assembly Overview ] Heat Shields Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the rear heat shield for the tunnel. Refer to => [ Rear Tunnel Heat Shield ] Rear Tunnel Heat Shield.

- Install the selector mechanism function unit.