Crankshaft Main Bearing: Specifications

Crankshaft Main Bearing Guide Frame Bolts





Replace bolts
First step: Bolts 1 through 16 50 Nm
Second step: Bolts 1 through 16 Tighten an additional 90°
Third step: Bolts 17 through 31 23 Nm

Allocation of Crankshaft Bearing Shells for Cylinder Block





Bearing shells with the correct thickness are allocated to the cylinder block in the factory. Colored dots on sides of bearing shells serve for identifying bearing shell thickness

Allocation of bearing shells to cylinder block is marked by a letter on the respective bearing on guide frame





Allocation of Crankshaft Bearing Shells for Guide Frame





Bearing shells with the correct thickness are allocated to the guide frame in the factory. Colored dots on the sides of bearing shells serve for identifying bearing shell thickness

The allocation of the bearing shells for the guide frame is identified by a series of letters on the crankshaft flywheel flange. The first letter of the row of letters represents bearing "1", the second letter is for bearing "2", etc.





Crankshaft Axial Clearance 0.15 to 0.25 mm

Crankshaft Radial Clearance
New 0.015 to 0.055 mm
Wear limit 0.080 mm