Backrest Adjustment Motor Assembly Overview

Backrest Adjustment Motor Assembly Overview

• For the sake of clarity, seat cushion and seat cover are not depicted.






1 Shaft

• The threaded hole for the nut - 8 - must be cleaned, for example, with a thread tap.

• Coat the threads on the shaft with locking fluid before installing the nut. For the correct locking fluid, refer to the => Parts Catalog

2 Driver backrest adjustment motor (V45)

• Front passenger side: front passenger backrest adjustment motor (V46)

• Removing and Installing, refer to => [ Backrest Adjustment Motor V45/V46 ] Backrest Adjustment Motor V45/V46

3 Rivet

• Quantity: 2

4 Bracket

5 Bolt

• Replacing

• Threaded hole for screws must be cleaned, for example, with thread cutter

• Use locking fluid when installing the bolt. For the correct locking fluid refer to the Parts Catalog

• 3.7 Nm

6 Backrest frame

7 Washer

8 Nut

• Replacing

• 6 Nm