Steering Column Switch Module Lower Trim

Steering Column Switch Module Lower Trim

Removing






• For reasons of clarity, the steering wheel is not shown.

- Remove the upper steering column switch module trim. Refer to => [ Steering Column Switch Module Upper Trim ] Steering Column Switch Module Upper Trim.

- Turn the steering wheel counterclockwise 90° from the straight position.

- Remove the screw - 1 -.

- Turn steering wheel back 180° and remove screw - 2 - on the opposite side.

• If bolts - 1 - and - 2 - are not accessible, steering wheel must be removed for further work.

- Remove screw - 4 - and lower steering column switch module trim - 3 -.

- Disconnect the connector and unclip the cable holder.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Steering Column Switch Module Trim Assembly Overview ] Steering Column Switch Module Trim Assembly Overview.