Roof Grab Handle

Roof Grab Handle

Special tools, testers and auxiliary items required

• long reach special wrench for slotted bolts (VAS 6543)

Removing






Unclip the expanding caps - 1 - and - 3 - but only up to their lock position (do not pull them out all the way otherwise the silicone brake and spring and fall out and then the handle has to be replaced).

- Unclip expanding caps - 1 - and - 3 - to the locking position using an offset screwdriver - 2 -.

- Remove the roof grab handle - 4 - from the body opening.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Upper A-Pillar Trim Assembly Overview ] Upper A-Pillar Trim Assembly Overview.