Instrument Panel With Installation Components Assembly Overview
Instrument Panel with Installation Components Assembly Overview
1 Right gap cover
• For the instrument panel
• Removing and Installing, refer to => [ Instrument Panel Gap Cover ] Instrument Panel Gap Cover
2 Left gap cover
• For the instrument panel
• Removing and Installing, refer to => [ Instrument Panel Gap Cover ] Instrument Panel Gap Cover
3 Bolt
• 3 Nm
4 Driver side trim
• For the instrument panel
• Removing and Installing, refer to => [ Driver Side Instrument Panel Trim ] Driver Side Instrument Panel Trim
5 Frame
• For instrument cluster
• Removing and Installing, refer to => [ Instrument Cluster Frame ] Instrument Cluster Frame
6 Bolt
• Quantity: 4
• 3 Nm
7 Bolt
• 3 Nm
8 Instrument panel vent
• For driver side
• Removing and Installing, refer to => [ Driver Side Instrument Panel Vent ] Driver Side Instrument Panel Vent
• Replace damaged or deformed clips
• When sliding it into the installation opening, make sure the air duct engages correctly.
• Press it into the installation opening as far as the stop.
9 Instrument Cluster
10 Cover
• For the instrument panel vents
• Removing and Installing, refer to => [ Instrument Panel Vent Cover ] Instrument Panel Vent Cover
• Replace damaged or deformed clips
• Press on until it engages audibly
11 Instrument Panel
• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Pyrotechnic, Electrical and Mechanical Restraint System Components, Safety Precautions and Testing Procedures ] Testing and Inspection.
• Follow the allocation of the airbag to the instrument panel => Parts Catalog.
• Removing and Installing, refer to => [ Instrument Panel ] Instrument Panel
12 Cover
• For the front information display control head (J685)
• Removing and Installing, refer to => [ Front Information Display Control Head Cover J685 ] Front Information Display Control Head Cover J685
• Replace damaged or deformed clips
• Press on until it engages audibly
13 Front information display control head (J685)
• Removing and installing
14 Instrument panel vent
• For front passenger side
• Removing and Installing, refer to => [ Passenger Side Instrument Panel Vent ] Passenger Side Instrument Panel Vent
15 Center instrument panel vent
• Removing and Installing, refer to => [ Center Instrument Panel Vent ] Center Instrument Panel Vent
16 Bolt
• Quantity: 2
• 3 Nm
17 Emergency flasher button (E229)
18 Front passenger side trim
• For the instrument panel cover
• Removing and Installing, refer to => [ Front Passenger Side Instrument Panel Trim ] Front Passenger Side Instrument Panel Trim
• Press on until it engages audibly
19 Bolt
• Quantity: 2
• 3 Nm
20 Front display open/close button (E462) / display unit button (E506)
21 Information electronics control module 1 (J794)
• If equipped
• Removing and installing
22 Switch unit
• With Start/Stop mode button (E693) , parallel parking assistance button (E581) , parking aid button (E266) , front passenger airbag -disabled- indicator lamp (K145) , rear spoiler adjustment switch (E127) , ASR/ESP button (E256)
23 Trim
• For information electronics control module 1 (J794)
• Removing and Installing, refer to => [ Trim for Information Electronics Control Module 1 Frame J794 ] Trim For Information Electronics Control Module 1 Frame J794
24 Climatronic Control Module (J255)
25 Bolt
• Quantity: 4
• 1 Nm
26 Anti-theft immobilizer reading coil (D2)