Hood Weatherstrip: Service and Repair

Hood Seal






1 Gasket for plenum chamber

• To remove, pull forward off the body flange.

• Mount the seal on the foam piece and then push it onto the flange on the body.

• Mount the seal on the opposite side on the foam piece and push it onto the flange on the body.

• Press the seal on the opposite side on the flange on the body using up any overlap.

2 Right sealing profile

• To remove, unclip it from the fender flange and the suspension strut tower.

• Press the clips on the foam piece into the body when installing.

3 Plenum chamber - bulkhead

• Slide the plenum chamber seal on at the sides.