Backrest Trim, Fixed Rear Seat Backrest

Backrest Trim, Fixed Rear Seat Backrest

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Remove the center armrest, bracket and hinges. Refer to => [ Center Armrest, Bracket and Hinges, Fixed Rear Seat Backrest ] Center Armrest, Bracket and Hinges, Fixed Rear Seat Backrest.

- Remove the center armrest from the bracket and hinges. Refer to => [ Center Armrest, Fixed Rear Seat Backrest ] Center Armrest, Fixed Rear Seat Backrest.

- Remove the backrest trim screw - 5 -.

- Release the tabs for the lower side backrest trim - 2 - using the (3409) on the backrest cover - 1 -.

- Remove the backrest trim from the cover - arrows - and unhook the hooks - 3 - and - 4 -.

- Remove the backrest trim.

Installing

Install in reverse order of removal. Note the following:

The hooks on the upper side of the backrest trim can get damaged during removal.

- Check the backrest trim - 1 - around the hooks - 3 - and - 4 - for damage and replace if necessary.

Further installation is performed in the reverse order of removal.

Tightening specifications, refer to => [ Center Armrest and Backrest Cover with Trim, Fixed Rear Seat Backrest Overview ] Center Armrest and Backrest Cover With Trim, Fixed Rear Seat Backrest Overview.