MMI Screen Cover, From MY 12

MMI Screen Cover, From MY 12

Special tools, testers and auxiliary items required

• Wedges (T10383)

• Hook (T40207)

Removing






- Move the steering wheel as far down as possible.

- Unclip the MMI screen cover - 1 - from the bottom of the instrument panel - arrows - using (T10383).

- Unclip the MMI screen cover - 1 - carefully from the bottom of the instrument cluster - arrow - using (T10383).






- Unclip the MMI screen cover - 1 - from the bottom of the instrument panel - arrow B - using (T10383).






• The vent has a hole on both sides for attaching the hook (T40207).

- Carefully insert the (T40207) between the slats and hook it to the side of the vent.

- Disengage the vents on the sides - arrow A -.

- Unclip the top of the MMI screen cover - 1 - from the instrument panel - arrows -.






- Disconnect the electrical connector on the instrument panel vent.

- Disconnect the connector from the front passenger airbag disabled indicator lamp (K145) / emergency flasher button (E229) and remove the MMI screen cover.

Installing

Install in reverse order of removal. Note the following:

• Check the clips for damage or deformation and replace them if necessary.

- Press the MMI screen cover on until it engages audibly.