High Tone and Low Tone Horns, From 06.2008

High Tone and Low Tone Horns, from 06.2008

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing






- Reach into the opening - arrow A - remove the lower air inlet grille - 1 - from the bumper - arrow B -.

- Remove the nut - 5 -.






- Remove the low tone horn (H7) - item 3 - and disconnect the connector - 4 -.

- Disconnect the electrical connector - 6 -.

- Remove the nut - 2 - and remove the high tone horn (H2) - item 1 -.

Installing

Install in reverse order.

Tightening Specifications