Selector Lever Scale Illumination Bulb (L101)

Selector Lever Scale Illumination Bulb (L101)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing

- Set the parking brake.

- Move the selector lever into "N".

- Turn off the ignition.

- Unclip the selector lever boot and remove it - arrows -.






- Stretch the selector lever boot upward over the handle.






- Remove the center console trim using (3409) - arrows -.

- Disconnect electrical connectors and remove center console trim.

- Remove the bolts - arrows - and then remove the selector lever boot trim - 1 - and selector lever scale illumination bulb.






Installing

Install in reverse order, paying attention to the following:

Tightening specifications, refer to:

• => [ Selector Lever Handle with Side Locking Button and Selector Lever Scale Illumination Bulb (L101) Overview ] Selector Lever Handle With Side Locking Button and Selector Lever Scale Illumination Bulb (L101) Overview

• => [ Selector Lever Handle with Front Locking Button and Selector Lever Scale Illumination Bulb (L101) Overview ] Selector Lever Handle With Front Locking Button and Selector Lever Scale Illumination Bulb (L101) Overview

- Make sure the trim clicks into the center console.