Right Footwell Vent (G262)

Right Footwell Vent (G262)

• The Right Footwell Vent Temperature Sensor is installed only on vehicles equipped with the Comfort A/C system.

Removing

- Move the passenger seats as far back as possible.

- Switch off ignition.

- Remove glove compartment.

- Remove the right footwell vent (passenger side) - C -. Refer to => [ Right Footwell Vent ] Right Footwell Vent.

- Disconnect the electrical connection - A -.

- Turn the sensor - D - 90° and remove it from the right footwell vent - C -.





Installing

Installation is carried out in the reverse order, when doing this note the following.

- Check the seal - E - for damage and proper seating.

- Install the removed parts in the opposite order.

- Check the Climatronic Control Module (J255) DTC memory and erase any displayed malfunctions if necessary using the Vehicle Diagnosis, Testing and Information System VAS 5051 under "Guided Fault Finding".