Seat Belt Latch Securing Point, Center 2nd Row

Seat Belt Latch Securing Point, Center 2nd Row

Removing







Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components General Safety Precautions ] .

- Remove 2nd row seating bench (two thirds bench). Refer to => [ Bench Seat ] Bench Seat.

- Remove the cap - 1 - from the bench seat.

- Remove the screw - arrow - and remove the seat belt latch - 2 -.

Installation

Installation is in reverse order of removal, noting the following:


Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components General Safety Precautions ] .

• Screw - arrow - tightening specification: 55 Nm.