Right Instrument Panel Fuse Panel

Right Instrument Panel Fuse Panel

Removing






- Turn off the ignition and disconnect the ground cable from the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the glove compartment.

- Open the clip - 1 - in - direction of arrow - and remove the fuse panels - 2 - and - 3 - out of the fuse panel B.

- Unlock the release and remove from the fuse carrier.






- Remove the fuses from the fuse panel.

- Open the clips - arrows - and remove the fuse panel cover.

- Pull off retaining strip - 1 - for harness connectors - arrow - and remove harness connectors from connector socket.






• For the exact assignment of right instrument panel fuse panel refer to the current wiring diagram.

Installing

Install in reverse order of removal. Note the following:

- Install the glove compartment.

- Connect the battery. Required actions, refer to=> [ Connecting ] Battery, Disconnecting and Connecting.