Radiator Assembly Overview

Radiator Assembly Overview

Risk of injury from coolant fan starting by itself.

• Before working in fan shroud area, disconnect electrical connectors.






1 Coolant Hose

• To the coolant reservoir

• Lift the retaining clamp to remove

• Connecting, refer to => [ Connect the Coolant Hose to the Coupling ]

2 O-ring

• Replace

3 Coolant Hose

• Lift the retaining clamp to remove

4 O-ring

• Replace

5 Coolant Hose

• Lift the retaining clamp to remove

6 O-ring

• Replace

7 Radiator

• Removing and installing, refer to => [ Radiator ] Radiator

• After replacing, replace entire amount of coolant

8 Air Duct

9 Condenser

10 Hydraulic Oil Cooler

• For power steering

11 Retaining Pin

• Disengage and remove using screwdriver

12 Rubber Buffer

13 Rubber Bushing

• For radiator

14 Rubber Buffer

15 Bolt

• 3.5 Nm

16 Air Duct

17 O-ring

• Replace

18 Coolant Hose

• Lift the retaining clamp to remove

Connect the Coolant Hose to the Coupling





- Remove the old O-ring - 2 - in the coolant hose - 3 -.

- Coat new O-ring with coolant and install it in the coolant hose.

- Press the coolant hose onto the connection - 1 - until it engages audibly.

- Press the coolant hose on again and pull to make sure the connection is engaged correctly.