Input Shaft With 7 Lining Discs

Reverse Gear Clutch






1 Corrugated Spring Washer

• If there are problems or damage, replace on the reverse gear clutch

2 Lower Adjustment Disc

• Determine thickness E1, refer to => [ Reverse Gear Clutch, Setting ] Reverse Gear Clutch

• The thickness of the setting discs under E1 must be at least 2.15 mm

• If there are problems or damage, replace on the reverse gear clutch

3 Lining Disc

• Quantity: 6

• If there are problems or damage, replace on the reverse gear clutch

4 Outer Clutch Disc

• Quantity: 5

• If there are problems or damage, replace on the reverse gear clutch

5 Upper Adjustment Disc

• Determine thickness "E2" => [ Reverse Gear Clutch, Setting ] Reverse Gear Clutch

• If there are problems or damage, replace on the reverse gear clutch