Oil Pressure Switch

Oil Pressure Switch

Removing

- Remove the rear engine cover - top arrows -.





• To collect escaping engine oil, place a clean cloth under oil filter housing.

- Disconnect electrical connector - arrow -.





- Remove the Oil Pressure Switch (F22).

Installing

• Tightening specifications. Refer to => [ Oil Filter Housing and Oil Pressure Switch Assembly Overview ] Oil Filter Housing and Oil Pressure Switch Assembly Overview.

Installation is performed in reverse order of removal, noting the following:

• Replace sealing ring.

• To prevent coolant loss, insert the new Oil Pressure Switch (F22) in the connecting pieces immediately.

- Check oil level