Left Footwell Outlet and Vent

Left Footwell Outlet and Vent

The Footwell Outlet Temperature Sensor (G192) is installed only on vehicles equipped with the Basis A/C system.

TheLeft Footwell Vent Temperature Sensor (G261) is installed only on vehicles equipped with the Comfort A/C system.

• Different designation, of the currently identical sensor, depending on the A/C version. Refer to => [ A/C Unit and Air Intake Housing Components ] A/C Unit and Air Intake Housing Components.

Removing

- Move the driver seat as far back as possible.

- Switch off ignition.

- Remove the storage compartment under the dash panel on the driver's side..

- Disconnect the electrical connection - A -.





- Turn the sensor - B - 90° and remove it form the left (driver's side) footwell vent.

Installing

Installation is carried out in the reverse order, when doing this note the following.

- Check the seal - C - for damage and proper seating.

- Install the removed parts in the opposite order.

- Check the Climatronic Control Module (J255) DTC memory and erase any displayed malfunctions if necessary using the Vehicle Diagnosis, Testing and Information System VAS 5051 under "Guided Fault Finding".