Right Rear Fuse Panel

Right Rear Fuse Panel

Removing





- With ignition switched off, disconnect battery ground wire. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the end panel trim panel.

- Release the retaining clips - 3 - in the - direction of the arrow - and press the fuse panel - 2 - back and out of the base mount.

- Remove the fuses from the fuse panel.





- Release retaining clips - arrows - and remove the cover from the fuse panel.

- Pull off retaining strip - 1 - for harness connectors - arrow - and remove harness connectors from connector socket.





• Check the exact assignment for the right rear fuse panel in the current wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install the end panel trim panel.

- Connect battery. Required actions => [ Connecting ] Battery, Disconnecting and Connecting.