Rear ABS Wheel Speed Sensor

Rear ABS Wheel Speed Sensor





1 Right Rear ABS Wheel Speed Sensor (G44)/Left Rear ABS Wheel Speed Sensor (G46)

2 Bolt

• 8 Nm

• The sensor ring/rotor is installed in the respective wheel bearing unit and cannot be replaced.

Removing

- Raising vehicle

- Release connector - 1 - on speed sensor and disconnect.





- Remove bolt - 2 -.

- Remove the speed sensor - 1 - from the wheel bearing housing.

Installing

Installation is the reverse of removal, with special attention to the following:

- Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with Polycarbamide grease G 000 650.

- Lower the vehicle.