Hydraulic Unit - Removing

Hydraulic Unit

Removing

- Remove the Ground (GND) connection - arrow - at the top of the hydraulic unit bracket.





- Remove the hydraulic oil reservoir. Refer to => [ Hydraulic Oil Reservoir ] Service and Repair.

- Remove the hydraulic pressure line. Refer to => [ Hydraulic Pressure Line from Shift Actuator to R Tronic Hydraulic Unit ] .

- Disconnect electrical connector - 1 -.





- Remove the bolts - arrows - and the hydraulic unit.

Installing

• Tightening specification. Refer to => [ Hydraulic Unit, R Tronic Assembly Overview ] Hydraulic Unit, R Tronic Assembly Overview.

Install in reverse order, paying attention to the following:

- Install the hydraulic pressure line. Refer to => [ Hydraulic Pressure Line from Shift Actuator to R Tronic Hydraulic Unit ] .

- Install the hydraulic oil reservoir. Refer to => [ Hydraulic Oil Reservoir ] Service and Repair.

- Attach the Ground (GND) connection - arrow - at the top of the hydraulic unit bracket.