Left Exhaust Manifold With Catalytic Converter

Left Exhaust Manifold with Catalytic Converter

Removing

• Engine/transmission subassembly removed and placed on the scissor lift table (VAS 6131 A), refer to => [ Engine/Transmission Subassembly, Lowering onto Scissor Lift Table ] Engine/Transmission Subassembly, Lowering Onto Scissor Lift Table.

- Remove electrical connectors from bracket and disconnect:





1. For oxygen sensor 2 after catalytic converter (G131)

2. For heated oxygen sensor 2 (G108)

- Free up the wires to the oxygen sensors.

- Remove the bolt on the left catalytic converter bracket - arrow -.





- Remove the nuts in sequence - 6 to 1 -.





- Remove the left exhaust manifold with catalytic converter.

Installing

• Tightening specifications => [ Individual Suspension Components,
Left Side ] Exhaust Manifold Assembly Overview.

Installation is in reverse order of removal, note the following:

• Replace the seal and self-locking nuts.

- Mount the seal on the threaded pin.

- Insert exhaust manifold in securing strips and tighten => [ Left Exhaust Manifold, Tightening
Specifications and Sequence ] Exhaust Manifold Assembly Overview.