Air Flow Meter/Sensor: Service and Repair

Mass Air Flow Sensors

Removing

• The following procedure describes removal and installation of the left mass air flow sensor 2 (G246).

- Install the protective body covers. Refer to => [ Protective Body Covers, Installing ] Procedures.

- Remove the engine cover - arrows -. Do not jerk or pull to one side.





- Disconnect the connector - 1 -.





- Remove the mass air flow sensor from the air filter element - arrows -.

Installing

Installation is in reverse order of removal, note the following:

• Tightening specifications, refer to => [ Air Filter Assembly Overview ] Air Filter Assembly Overview.

• To ensure both mass air flow sensors work correctly, follow the information and procedure below.=> [ To ensure both mass air flow sensors work
correctly, follow the information and procedure below. ] Air Filter