Seat Adjustment Switch

Seat Adjustment Switch

• Removal and installation is the same on the driver and passenger seat.

Removal





- Remove tunnel side trim panel. Refer to => [ Sill Side Trim ]. Sill Side Trim

- Disconnect the electrical connectors - 6 - and - 7 -.

- Remove seat and backrest adjustment actuators - 4 - and - 5 -. Refer to => [ Seat and Backrest Adjustment Actuator Assembly Overview ] Power Seats.

- Remove the bolts - 1 -.

- Remove the seat fore/aft, inclination, height and backrest adjustment switches - 2 -.

Installation

To install, perform the steps used in removal in reverse order.

Tightening specifications, refer to => [ Seat Adjustment Switch Assembly Overview ] Power Seats.