Four-Way Lumbar Support Assembly Overview

Four-Way Lumbar Support Assembly Overview





1 Four-way Lumbar Support

• Removing and installing, refer to => [ Four-Way Lumbar Support ] All Seats

2 Lumbar Support Curvature Adjustment Motor

• Driver seat lumbar support curvature adjustment motor (V125)

• Passenger seat lumbar support curvature adjustment motor (V126)

• Assembly overview, refer to => [ Lumbar and Height Adjustment Motors Assembly Overview ] Power Seats

• Removing and installing, refer to => [ Lumbar Support Curvature Adjustment Motor ] Power Seats

3 Clip

• for release cable guide - 4 -

4 Release

• for lumbar support height adjustment

• Can only be replaced with the lumbar support height adjustment motor

5 Lumbar Support Height Adjustment Motor

• Driver Seat Lumbar Support Height Adjustment Motor (V129)

• Passenger Seat Lumbar Support Height Adjustment Motor (V130)

• Assembly overview, refer to => [ Lumbar and Height Adjustment Motors Assembly Overview ] Power Seats

• Removing and installing, refer to => [ Lumbar Support Height Adjustment Motor ] Power Seats

6 Backrest Frame

7 Rivet

• Rivet using (V.A.G 1753A)

• Before riveting, place a plastic washer - 10 - between the lumbar support and backrest frame

8 Release

• For lumbar support curvature adjustment

• Can only be replaced with the lumbar support curvature adjustment motor

9 Clip

10 Plastic Washer

• Between four-way lumbar support and backrest frame

11 Retaining Plate

12 Retainer

13 Cable Tie