Base Mount with Right Instrument Panel Fuse Panel, Removing and Installing

Base Mount with Right Instrument Panel Fuse Panel, Removing and Installing

Removing





- With ignition switched off, disconnect battery Ground (ND) wire => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove glove compartment.

- Release retaining springs - arrows - and press fuse panels - 1 - and - 2 - toward rear out of base mount.

- Remove bolts - 1 - and - 2 -.





- Remove base mount in - direction of arrow - from central tube for instrument panel.

Installing

Install in reverse order of removal, observing the following:

- Install glove compartment.

- Connect battery. Required actions => [ Vehicles with : ] Battery, Disconnecting and Connecting.

Tightening Specifications