Fuel Injection System - Fastener Tightening Specifications

Fastener Tightening Specifications






High Pressure Line Protective Plate, Tightening Specifications

- Tighten the bolts - arrows - on the protective plate - 1 -.






• Tightening specifications: 9 Nm

High Pressure Line, Installing

- First tighten the high pressure line union nut by hand.

- Make sure the high pressure line does not have tension.

- To tighten the high pressure line on the high pressure pump, use the torque wrench 5-50 Nm (V.A.G 1331) with the ratchet, reversible (V.A.G 1331/1) and socket 14 mm (3150).






• Tightening specification: union nut on the high pressure line, 25 Nm