Balance Shaft Assembly Overview

Balance Shaft Assembly Overview






1 Balance shaft

• Removing and installing, refer to => [ Balance Shaft ] Balance Shaft

2 Bolt

• 60 Nm

• To loosen and fasten, use a drill bit 8 mm dia. as counter-holder

3 Balance shaft transmission side

• Can only be placed on the balance shaft in one position

4 Bearing end bracket

5 Bolt

• 13 Nm

6 Balance shaft belt pulley side

• Can only be placed on the balance shaft in one position

7 Bolt

• 60 Nm

• To loosen and fasten, use a drill bit 8 mm dia. as counter-holder