System Specifications

Fastener Tightening Specifications






Vibration Damper, Tightening Specification and Sequence






• Replace bolts that are tightened to the specification.

• Clean the threaded holes with a thread tap.

• Install the bolts with locking compound; Locking compound, refer to the Electronic Parts Catalog (ETKA).

- Tighten bolts in 3 stages as follows:






Baffle Plate - Tightening Specifications and Sequence






- Tighten baffle plate bolts to 9 Nm in - 1 to 16 - sequence.

Guide Frame Tightening Specifications and Sequence






• Replace bolts that are tightened to the specification.

- Tighten the bolts in 5 steps in the sequence shown:






- Tighten the guide frame to cylinder block sealing surface bolts, - highlighted in dark -, in a diagonal sequence to 9 Nm.