Air Injection Pump: Service and Repair

Secondary Air Injection Pump

Removing

- Bring lock carrier into service position. Refer to => [ Lock Carrier, Moving into Service Position ] Lock Carrier, Moving Into Service Position.

- Remove right auxiliary cooler. Refer to => [ Right Auxiliary Cooler ] Right Auxiliary Cooler.

- Disconnect hoses - 2 - and - 3 - at Secondary Air Injection pump - 1 -.





- Separate electrical connector - 4 -.

- Remove nut and remove Secondary Air Injection pump from bracket.

Installing

Installation is in reverse order of removal, note the following:

- Install right auxiliary cooler. Refer to => [ Right Auxiliary Cooler ] Right Auxiliary Cooler.

- Install the lock carrier with attachments. Refer to =>
Radiator Support Radiator Support

- Place torque support on rubber buffer for torque support and tighten bolts - arrows -.





- Install front bumper cover.

- Check headlight adjustment.

Tightening Specifications