Measured Value Block Table

Measured Value Block table - 01J, Continuously Variable Transmission (CVT)

Display Group Number 001:

Display Group Number 002:

Display Group Number 003:

Display Group Number 004:

Notes on display group number 004:

^ If "0 RPM" is shown in display field 3 or 4, the corresponding sender is faulty and the Transmission Control Module (TCM) must be replaced.
^ If "0 RPM" is shown in display field 3 and 4, there is a mechanical defect in the transmission, and the transmission must be replaced.

Display Group Number 005:

Display Group Number 005-006:

Display Group Number 007:

Note on display group number 007, display field 4:

^ If "AS" is always displayed, the clutch is slipping. The ATF must be changed. If "AS" is still displayed the transmission must be replaced.

Display Group Number 008:

Display Group Number 009:

Display Group Number 010:

Display Group Number 011:

Display Group Number 012-017:

Display Group Number 018-021:

Display Group Number 022:

Display Group Number 022-124:

Display Group Number 125:

Notes on display group number 125

^ If "1" is displayed, communication from the corresponding control module to the Transmission Control Module (TCM) is O.K.
^ If "0" is displayed and no trouble code has been set in the DTC memory, the corresponding control modules does not have CAN capability (or is faulty).