Balance Shaft Component Overview

Balance Shaft Component Overview





1 Differential shaft

• Removing and installing, refer to => [ Balance Shaft ] Service and Repair

2 60 Nm

• To loosen and fasten, use 8 mm dia. drill bit as counter-holder

3 Balance weight (timing chain side)

• Can only be positioned one way on balance shaft

4 Bearing end bracket

5 13 Nm

6 Balance weight (belt pulley side)

• Can only be positioned one way on balance shaft

7 60 Nm

• To loosen and fasten, use 8 mm dia. drill bit as counter-holder