Bearing for Track Control Arm, Replacing

Bearing for Track Control Arm, Replacing

Special tools, testers and auxiliary items required

• Assembly tool (3301)

• Assembly tool (3346)

• Assembly tool (3350/1)

• Use protective covers when clamping aluminum control arms.

Inner mounting, removing





- Mark location of old mounting.

Mounting installation location





- Transfer installation mark for old mounting to new mounting.

Inner mounting, pulling in





- Insert bearing - A - in thrust piece (3346/1) to a depth of 3.2 mm.

- Pull mounting in onto stop.

Pull out outer mounting





Pull in outer mounting





To press in, use installation lubricant G 294 421 A1 thinned with water at a ratio of 1:100.

- Pull in mounting in center.

Chamfers on mounting and control arm must align.