Oil Pressure Sender: Service and Repair

Oil Pressure Switch

Special tools, testers and auxiliary items required

• Assembly Tool (T10118)

Removing

- Remove ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.

- Remove oil dipstick.

- Remove bolt - 3 -, remove oil dipstick guide tube - 2 - and lay aside.





• Ignore items - 1 and 4 -.

- Remove center noise insulation fasteners - 1 to 3 -.





- Disconnect electrical harness connector - 1 - for A/C clutch on A/C compressor and free up electrical wire.






Risk of injury from refrigerant.

• The air conditioning refrigerant circuit must not be opened.

- Remove bolts - arrows -.

- Secure A/C compressor with refrigerant hoses attached to front of noise insulation frame.

- Disconnect electrical connector - arrow - on oil pressure switch (F1) with (T10118).





- Remove oil pressure switch (F1).

Installing

• Tightening specifications, refer to => [ Oil Cooler and Oil Filter Housing Assembly Overview ] Oil Cooler and Oil Filter Housing Assembly Overview.

Installation is in reverse order of removal, note the following:

- Install A/C compressor.

- Install ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.