Power Window Control Head (In Drivers Door) E512, Removing and Installing

Power Window Control Head (in Drivers Door) E512, Removing And Installing

Removing

- Switch off ignition and remove ignition key.
- Remove front door trim.
- Detach insulating mat from door trim.







- Remove bolts - arrows - and detach armrest.







- Remove bolt - arrow - and detach switch mount - 1 - from armrest.







- Release fasteners on armrest side by pressing retaining element - arrows -.
- Use small screwdriver to carefully release fasteners - 1 - on trim side.
- Pull window regulator switch - 2 - downwards out of door trim.
- Disconnect connector - 3 - at window lifter switch.

Installing

Install in reverse order of removal, observing the following:
- Press switch into switch mount until fasteners engage.
- Install front door trim.