Radiator and Coolant Fan Assembly Overview

Radiator and Coolant Fan Assembly Overview





1 Coolant Fan (V7)

• With coolant fan control module (J293)

• Removing and installing, refer to => [ Coolant Fan ] Coolant Fan

2 Coolant Hose

• To pull off, disengage retaining clip

• Connect to the radiator

3 O-ring

• Replace

4 Coolant Hose

• To pull off, disengage retaining clip

• Connect to the radiator

5 Radiator

• Removing and installing, refer to => [ Radiator ] Radiator

• After replacing replace entire amount of coolant

6 6 Nm

7 Bracket for Radiator

8 O-ring

• Replace

9 Coolant Hose

• To pull off, disengage retaining clip

• Connect to the radiator

10 Coolant Fan 2 (V177)

• With coolant fan control module 2 (J671)

• Removing and installing, refer to => [ Coolant Fan ] Coolant Fan

11 Retaining Pin

12 Rubber Buffer

• Disengage and remove using screwdriver

13 10 Nm

14 Rubber Bushing

15 10 Nm

• Replace

16 Fan Rib

• Removing and installing, refer to => [ Fan Shroud ] Service and Repair

Connect the Coolant Hose with the Connector Coupling





- Remove the old O-ring - 2 - in the coolant hose - 3 -.

- Moisten new O-ring with coolant additive and install it in the coolant hose.

- Press the coolant hose onto the connection - 1 - until it engages audibly.

- Press the coolant hose on again and pull to make sure the connection is engaged correctly.