Trim of Parking Brake Lever, Removing and Installing

Trim Of Parking Brake Lever, Removing And Installing

Special tools, testers and auxiliary items required







- Torque wrench V.A.G 1783







1 - Parking brake trim

- Removal:
- Disengage parking brake.
- Disengage trim on parking brake - 1 - and remove it.
- Pull up parking brake firmly.
- Remove two bolts - 3 - on carrier - 2 - and remove carrier.

- Installing:
- Pull up parking brake firmly.
- Place carrier on parking brake lever.
- Next tighten bolts - 3 - by hand.
- Disengage parking brake completely.
- Tighten both bolts - 3 -.
- Engage trim on parking brake - 1 - at rear in its mounts - 4 -.
- Press trim on parking brake - 1 - firmly.

2 - Carrier
3 - Screws, (2x)
- Tightening torque 1 Nm
4 - Trim mounts