Radar Interior Monitoring Control Module 2, Through 06.2006

Radar Interior Monitoring Control Module 2, through 06.2006

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing

- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Functions" routine Vehicle diagnosis, testing and information system VAS 5051.

- Switch off ignition and remove ignition key.

- Remove center console.

- Remove bolt - 3 -.





- Release the clip - arrow - and remove the Radar Interior Monitoring Control Module 2 (G305) - 2 - out of the mount.

- Disconnect electrical connector - 1 -.

Installing

Install in reverse order of removal, observing the following:

- Install center console..

Tightening Specifications