Transmission Cover (Transmission Removed), Removing and Installing

Transmission cover (transmission removed), removing and installing, 0A3, 6 Spd. M/T AWD

Special tools, testers and auxiliary items required

Drip tray V.A.G1306:

Removing
- Mount transmission on assembly stand
- Place drip tray V.A.G 1306 under transmission.
- Drain off gear oil.
- Unscrew bolts - arrows - and pull off transmission cover.

Installing

Note:
^ Replace O-rings.

- Replace O-ring on transmission housing.
- Install transmission cover and tighten bolts - arrows -.
- Fill up with gear oil and check gear oil level.

Tightening torque: