New Side Window, Installing

New Side Window, Installing

- Clean surface of window to be bonded using cleaning agent D 009 401 04 and prime with glass/paint primer D 009 200 02.
- Allow primer to air dry for 10 minutes.
- Press roof trim strip into securing clips at D-pillar.
- Apply adhesive.
- Note different distances of adhesive bead from edge of window.
- Adhesive bead height = 12 mm +3/-0 mm (0.472 in. +0.118/-0 in.)
- Adhesive bead width = 8 mm ± 2 mm (0.315 in. ± 0.078 in.)
- Install window glass in position in window opening and secure using adhesive tape.
Window seal must be located behind roof edging trim.
- Observe curing time.
Do not install bottom trim strip and B-pillar trim until curing time is completed.