Bearing Housing, Torsen Differential and End Cover

1. Bearing housing
^ Disassembling and assembling
2. Bolt, 25 Nm
^ Qty. 6
3. Dished spring
^ Installation position: larger diameter (concave side) faces shims
4. Shim
^ Qty. 2 or 3
^ Redetermining shims
5. Oil collector
^ Disassembling and assembling
^ Removing
^ Installing
6. Multi-point socket head bolt, 150 Nm
^ Removing
^ Installing
7. 2nd inner race for taper roller bearing for input shaft
^ Removing
^ Installing
8. Spring
9. Torsen differential
^ Can be serviced only by manufacturer
^ Servicing bearings for Torsen differential
10. Bolt, 25 Nm
^ Qty. 5
11. End cover
^ Servicing
12. Gasket
^ Replace
13. Dowel sleeve
^ Qty. 2
14. Gear cluster
^ Removing and installing
15. Oil drain plug 40 Nm
16. Magnet
^ Qty. 2
^ Clean
17. Support plate
^ Installation position: lugs face magnets
18. Bolt, 25 Nm
^ Qty. 2