Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Battery, Disconnecting and Reconnecting



Battery, Disconnecting And Reconnecting

Should service procedures specify disconnecting and reconnecting the battery, please heed the following CAUTIONS!

CAUTION:
Before beginning repairs on the electrical system:
- Where applicable, obtain anti-theft radio security code.
- Switch off all electrical consumers.
- Switch the ignition off and remove ignition key.
- Disconnect negative (-) battery terminal.
- On vehicles equipped with Audi Telematics by OnStar(R), switch-off the emergency (back- up) battery for the Telematic/Telephone Control Module prior to disconnecting vehicle battery
- After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Owners Manual.
- After reconnecting vehicle battery on vehicles equipped with Audi Telematics by OnStar(R), switch-on the emergency (back-up) battery for the Telematic/Telephone Control Module.

Battery, disconnecting

Special tools, testers and auxiliary items required







- Torque wrench VAG 133-or (equivalent 5-50 Nm)

- Heed CAUTIONS listed above







- Slide battery cover to right - arrow 1- and lift off - arrow 2- (where applicable).







- Disconnect negative (-) terminal - arrow - from battery post.

Battery, reconnecting
- Reconnect negative (-) terminal to battery post and tighten to specified torque.

The following steps are required after reconnecting battery:

NOTE:
- When reconnecting battery, activate vehicle equipment (radio/radio navigation system, clock, electric window lifters) in accordance with Owners Manual.
- On vehicles equipped with Audi Telematics by OnStar(R), switch on emergency (back-up) battery.
- Further measures after reconnecting the voltage supply.
- Check proper function of remote control keys; adapt keys if necessary. Inform customer that all additional keys must also be adapted to ensure that the remote control works properly Owners Manual.
- After re-connecting battery, the ESP indicator lamp will go out only after driving a distance of several meters.

Tightening torque

Component - fastener Nm
Battery terminal to battery post - nut 6