Ignition Coil: Service and Repair

Ignition Coils With Power Output Stage, Removing And Installing

Special tools, testers and auxiliary items required







- Ignition Coil Puller T40039

Removing:







- Remove both bolts - 1 - from the connector strip.







- Pull all ignition coils approximately 30 mm out of spark plug shaft using Ignition Coil Puller T40039 .







- Release connectors and pull all connectors simultaneously off from the ignition coils.

Installing:
- Insert all ignition coils loosely into spark plug shaft.







- Align ignition coils to the connectors and then connect all of the connectors onto the ignition coils.
- Press ignition coils uniformly onto the spark plugs by hand (do not use an impact tool).