Shift Mechanism Cover, Selector Lever Handle, Assembly Overview

Shift mechanism cover, selector lever handle, assembly overview, 01J, CVT A/T FWD





Note:
^ Lubricate bearing areas and moving parts with polycarbamide grease G 052 142 A2.

1 - Selector lever
2 - Shaft piece for selector lever
^ Removing and installing

3 - Selector lever handle
^ Removing and installing

4 - Cover
^ With selector scale and Tiptronic gate
^ Removing and installing

5 - Symbol panel
^ Clipped into cover

6 - Printed circuit
^ With integrated Tiptronic Switch F189
^ Removing and installing
^ Tiptronic switch consists of 3 hall sensors, which are activated by a magnet on the cross slide of the roll cover.
^ Before replacing circuit board when DTC "18161" is entered in DTC memory, first check adjustment of selector lever cable

7 - Roll cover
^ With solenoid for Tiptronic Switch F189 on transverse slide
^ Removing and installing

8 - Roll cover guide
^ Carefully pry apart the two halves