Selector Lever Mechanism, Checking

Selector lever mechanism, checking, 01J, CVT A/T FWD
^ Starter must not be operated in selector lever positions "S", "D", "R" and "Tiptronic gate".
^ For speeds exceeding 5 km/h and shifting into selector lever position "N", the shift lock solenoid must not engage to lock the selector lever. Selector lever can be shifted into a driving mode.
^ For speeds below 2 km/h (almost stand still) and shifting into selector lever position "N", the shift lock solenoid must only engage after approximately 1 second. Selector lever can only be shifted out of position "N" with the brake pedal depressed.

Selector lever in "P" position and ignition switched on:
- Do not operate brake pedal.
^ Selector lever is locked and also cannot be shifted out of "P" position while locking button on selector lever handle is pressed. Shift Lock Solenoid N110 is locking the selector lever.
- Depress brake pedal and hold.
^ Shift Lock Solenoid N110 enables the selector lever. It must be possible to select a driving mode without resistance while locking button on selector lever handle is pressed.
^ Slowly shift selector lever from "P" through "R, N, D, S", checking whether Transmission Range (TR) Display Y6 in instrument cluster matches the selector lever position.

Selector lever in "N" position and ignition switched on:
- Brake pedal not depressed:
^ Up to approximately 08.01: Selector lever is locked and can be shifted out of "P" position without pressing locking button on selector lever handle. Shift Lock Solenoid N110 is locking the selector lever.
^ As of approximately 08.01: Selector lever is not locked immediately when rapidly shifting through position "N" (e.g. from "R" to "D"). This enables e.g. "forward and reverse maneuvers" when vehicle is stuck. Shift lock engages when selector lever is located in "N" for longer than approximately 1 second with brake not being pressed.
- Depress brake pedal.
^ Shift Lock Solenoid N110 enables the selector lever. It must be possible to select a driving mode without resistance while locking button on selector lever handle is pressed.

Selector lever in "D" position, ignition switched on:
- Shift selector lever in Tiptronic gate.
^ Illumination of the "D" symbol must go out in selector mechanism cover and the "+" and "-" symbols must light up.
^ Transmission Range (TR) Display Y6 in instrument cluster must switch from "PRND" or "PRNDS" to "654321" when shifting selector lever into "Tiptronic gate".

If specified values are not obtained:
- Adjust selector lever cable.
- Check ignition key removal lock.