Brake Fluid Pressure Sensor/Switch: Service and Repair

Brake pressure sensor1 G201, removing and installing

Removing

Note: Protect engine compartment against escaping brake fluid.





- Loosen securing bolt - 1 - and pull the coolant expansion tank out in direction of - arrow -, then swivel tank to one side.
- Tightening torque: 6 Nm





- Disconnect connectors - 1 -.





- Unscrew brake pressure sensor - 4 -.

Installing
Remaining installation is in reverse sequence.
- Bleed brake system.
- Perform ESP road test VAS5051 vehicle diagnostic, testing and information system