Rear Final Drive installing

Rear final Drive installing

Installing
Installation is carried out in the reverse order, when doing this note the following:
^ All parts of the driveshaft marked must be re - installed in the same positions in relation to each other.
Installation position:
^ The three projecting sleeves on the rear final drive flange and driveshaft flange engage in the mounting holes in the flexible coupling.





Notes:
^ Do not damage seal (arrow) in driveshaft flange when removing and installing. If this seal is damaged the driveshaft must be replaced.
^ Slide driveshaft horizontally onto final drive guide pin (2nd technician).

- Bolt rear subframe onto body using new bolts