Rear

Rear Wiper Motor, Removing and Installing






1 - Wiper motor
2 - Rubber seal
3 - Hole in rear window
4 - Rear washer jet
5 - Shaft for rear wiper
6 - Connecting - pipe
7 - Harness connector
8 - Mounting nuts (3x, number 10)
9 - Washer fluid hose
10 - Motor cover

Removing
- Remove rear window wiper.
- Remove interior trim from tailgate:
- Disconnect harness connector -7-.
- Carefully remove washer fluid hose -9- from connecting pipe -6-.
- Remove nuts -8-.
- 8 Nm (71 in. lb)
- Remove wiper motor -1-.

Installing
- Install in reverse order of removal.


NOTE: When installing rubber seal -2-, carefully insert into hole in rear window -3-.