Torque Converter Oil Seal, Replacing

5 SPD. A/T 01L AWD
Torque converter oil seal, replacing
Special tools and equipment





VW 681 - extractor lever





3455 - Installation drift

^ Remove transmission.
^ Install transmission in repair fixture or place on level ground.
^ Carefully pull out torque converter.
^ Remove circlip -item. 2,.





^ Remove seal with extractor lever VW681.

Note:
^ Position extractor lever VW 681 directly behind sealing lip to avoid damaging wave washer -item. 4, Fig.
^ Replace wave washer if damaged.
^ Replace circlip if damaged.





^ Install seal to stop using installation drift 3455.
^ Insert circlip in groove.

Note:
^ The open side of the seal points toward the transmission. Lightly lubricate outer rim of seal and sealing lip with Vaseline.
^ Before installing seal be sure that the wavy washer -item. 4, was not damaged and was installed property.
^ The circlip must be seated in the bottom of the groove.